Kenwood KDC-MP145 Instruction Manual - Page 3

Before Use AWARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside t-hr.' ,,,,;tltlC UI tiL. CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to (page 4). How to reset your unit • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. 1. Release the faceplate lock so that it can be removed. Refer to (page 6) 2. Press the Reset button and reattaching the faceplate. Notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with vour Kenwood dealer to make sure that they work :.vith your model and in your area. • The characters which can be displayed by this unit I are A-Z 0-9 1\ - {} • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable. o r Reset button Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. ~ • Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liqUid such as thinner or alcohol may scratch the surface or erases characters. About the Terminals of the Unit and Faceplate • To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers. • If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the Handling CDs • Do not touch the recording surface of the CD. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the center of the disc and move outward. • When removing CDs from this unit, pull them out horizontally. • If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. CDs that cannot be used • CDs that are not round cannot be used. • CDs with coloring on the recording surface or CDs that are dirty cannot be used. • This unit can only play the CDs with ~"~ This unit may not correctly play discs which do not have the mark. • You cannot playa CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/ CD-RW recorder instruction manuaL) • 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. English I 3