Kenwood KDC-MP208 Instruction Manual - Page 10

Menu Operation Menu System Setting various functions. 1 Enter Menu mode Press the [B.BOOST] button for at least 1 second. "MENU"/ "MEnU" is displayed. 2 Select the menu item Press the top or bottom side of the Control knob. KDC-MP238/MP238CR/MP208 Display setting setting overview "CODE SET"/ Refer to Sets/Resets security code. "CODECLR" page 10/11 (Function of KDC-MP238) "CLK ADJ" Refer to Sets the clock. _ _ _ pagell "DIM" ON/OFF* Adjusts the brightness of the display according to the surrounding illumination. --"SWPRE" R*/SW _Se_ts_th_e-,--pr_eo_ut_o_ut-,--Pu_t. ID "SPRM" ON*/OFF Turns ON/OFF the Supreme ~ function. "CRSC" OFF/ON* Switches to Monaural to decrease liD noise when reception is poor. "NAME SET" Refer to Sets the display when switched ami page 12 to AUX source. "SCl" AUTO*/ Specifies whether the text is MANU scrolled automatically. "HDR MODE" Refer to Sets the receive mode of HR radio. CIm page 12 (Function of KDC-MP238) "AUX" I D OFF/ON1*/ Sets whether to display AUX ON2 during source selection. "CD READ" 1*/2 "DEMO" Refer to Sets the CD read mode. ID -------~. Specifies whether to enable ~ page 12 demonstration. KDC-138/138CR Display Setting Setting overview Source "CLCK" Refer to Sets the clock. page 11 ---- "REAR"/ REAR*/SUB Sets the preout output. "SUB" "CRSC" (Function of KDC-138) --- On* /OFF Switches to Monaural to decrease liD noise when reception is poor. --- "AUH" OFF/On* Sets whether to display AUX during source selection. *Factory setting I D : Can be set in standby state. ~: Can be set while Audio file source. I 10 KDC-MP238/CR/KDC-MP208/KDC-138/CR liD: Can be set during FM reception. ami: Can be set while accessing AUX source. CIm :Can be set while HD Radio source. ~ ~ • Refer to the respective page for information on how to set the items with reference page number. • Refer to the (page 14) for the details of the menu items. 3 Set the menu item Press the right or left side of the Control knob. 4 Exit Menu mode Press the [B.BOOST] button. Function of KDC-MP238 Activating Security Code When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off. ~ ~ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Enter Standby Press the [SRCI button. Select the "STANDBY" display. 2 Enter Menu mode Press the [B.BOOST] button for at least 1 second. When "MENU" is displayed, "CODE SET" is also displayed. 3 Enter Security Code mode Press the center of the control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 4 Select the digits to enter Press the right or left side of the Control knob. S Select the Security Code numbers Press the top or bottom side of the Control knob. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the center of the Control knob for at least