Kenwood KDC-MP342U Instruction Manual - Page 11
Audio Adjustments - subwoofer
UPC - 019048181169
View all Kenwood KDC-MP342U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Audio Adjustments Audio Control You can adjust following Audio Control items; Adjustment Item Display Range Subwoofer level "SW L" -15 - +15 Bass Boost "B.BOOST"/"B.B" "1"/"2"/"OFF"(The indicator turns on according to the setting.) System Q "NATURAL"/ "ROCK"/ Natural/Rock/Pops/Easy/ "POPS"/ "EASY"/ Top 40/Jazz/Game/User "TOP40"/ "JAZZ"/ setting "GAME"/ "USER" Bass level* "BAS L" -8 - +8 Middle level* "MID L" -8 - +8 Treble level* "TRE L" -8 - +8 Balance "BAL" Left 15 - Right 15 Fader "FAD" Rear 15 - Front 15 Exit Audio Control mode (Volume control mode) * Source tone memory: Puts the set up value in the memory per source. ⁄ • "USER": This appears when Bass level, Middle level, and Treble level are adjusted. When "USER" is selected, these levels are recalled. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] knob. 3 Select the Audio item to adjust Press the [AUD] knob. 4 Adjust the Audio item Turn the [AUD] knob. 5 Exit Audio Control mode Press any button. Press a button other than the [AUD] knob. Audio Setup You can set Sound system, such as follows; Adjustment Item Display Low Pass Filter "LPF" Volume offset "V-OFF" Range 80/120/160/Through(OFF) Hz -8 - ±0 (AUX: -8- +8) ⁄ • Volume offset: Sets each source's volume as a difference from the basic volume. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [AUD] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [AUD] knob. 4 Adjust the Audio setup item Turn the [AUD] knob. 5 Exit Audio Setup mode Press the [AUD] knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display "SP OFF" "SP 5/4" "SP 6*9/6" "SP OEM" 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the [AUD] knob. 3 Select the Speaker type Turn the [AUD] knob. 4 Exit Speaker Setting mode Press the [AUD] knob. English | 11