Kenwood KDC-MP635 Instruction Manual - Page 33
Activating Security Code, Deactivating Security Code
View all Kenwood KDC-MP635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
In Standby mode Activating Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. ⁄ • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. Refer to (page 7). 2 Enter Menu mode Using the Control knob, select "MENU". For the operation method, refer to (page 10). "Security Set" is displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "SECURITY SET" is also displayed. 4 Select the digits to enter Push the Control knob towards right or left. 5 Select the Security Code numbers Turn the Control knob or push it towards up or down. 6 Repeat step 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "SECURITY SET" is also displayed. 8 Do the step 4 through 7 operation, and reenter the Security Code. "Approved" is displayed. The Security Code function activates. ⁄ • If you enter the wrong code in step 4 through 6, repeat from step 4. 9 Exit Security Code mode Press the [FNC] button. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. "Approved" is displayed. Now, you can use the unit. ⁄ • When the Security Code function is activated, "Security Set" changes to "Security Clear". • To deactivate the Security Code function, see the next section . In Standby mode Deactivating Security Code To deactivate the Security Code function. 1 Select Security Code mode Turn the Control knob. Select the "Security Clear" display. 2 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "SECURITY CLEAR" is also displayed. 3 Select the digits to enter Push the Control knob towards right or left. 4 Select the Security Code numbers Turn the Control knob or push it towards up or down. 5 Repeat steps 3 and 4, and complete the Security Code. 6 Press the Control knob for at least 3 seconds. "Clear" is displayed. The Security Code function deactivates. 7 Exit Security Code mode Press the [FNC] button. ⁄ • If a wrong security code is entered, "Error" is displayed. Enter a correct security code. English | 33