Kenwood KDC-X302 Instruction manual - Page 33

LEARNING STEERING REMOTE CONTROL (for ) 7 Press and hold any control keys on your steering remote control which you want to assign. A list of key functions will appear on the display. NONE (default)/MUTE/SEEK UP/SEEK DOWN/VOL UP/VOL DOWN/ MODE/ON HOOK/OFF HOOK/VOICE/ENTER 8 Turn the volume knob to select a function to assign, then press the knob. The selected key function is assigned to the steering remote control key you have selected in step 7. The display returns to the key list as on step 5. • K## (Function): When certain function has been assigned to a key. 9 Repeat steps 6, 7 and 8 to assign other control keys. 10 Press and hold to exit. To reassign the control keys 1 Press repeatedly to enter STANDBY. 2 Press the volume knob to enter [FUNCTION]. 3 Turn the volume knob to select [SYSTEM], then press the knob. 4 Turn the volume knob to select [USER S.REMO], then press the knob. 5 Turn the volume knob to select [RESET KEY], then press the knob. 6 Turn the volume knob to select [YES], then press the knob. All the control keys will be reset. Selecting [NO] will cancel the operation. When [FACTORY RESET] is set to [YES] ( 5), it will also reset the learning steering remote control. To return to the previous setting item, press . TROUBLESHOOTING Symptom Sound cannot be heard. "MISWIRING CHECK WIRING THEN PWR ON" appears. General "PROTECTING SEND SERVICE" appears. • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. The unit does not work at all. (For ) "SET ERROR"/"DEL ERROR" (For ) "ERROR"/"FAIL" Radio • Radio reception is poor. • Static noise while listening to the radio. Disc cannot be ejected. CD/USB/iPod Noise is generated. Tracks do not play back as you intended them to play. "READING" keeps flashing. Elapsed playing time is not correct. "LOADING" appears when you enter search mode by pressing . Remedy • Adjust the volume to the optimum level. • Check the cords and connections. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. Send the unit to the nearest service center. Clean the connectors. ( 32) Reset the unit. ( 3) Setting/deleting the remote control ID is unsuccessful. Turn the power off, then turn on the power and perform the operation again.( 6) Your steering remote controller is not compatible, learning may not be completed. Consult your car audio dealer for details. Connect the antenna firmly. Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. ( 3) Skip to another track or change the disc. Playback order is determined when files are recorded. Do not use too many hierarchical levels or folders. This is caused by how the tracks are recorded. This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later. ENGLISH 29