Kenwood KDC-X491 Instruction Manual - Page 8

General features Audio Control 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Basic Audio item Turn the [VOL] knob. Adjustment Item Display Range Rear Volume*1 "R-VOL" 0 - 35 Subwoofer level "SW L" -15 - +15 System Q "NATURAL"/"USER"/ Natural/User/ "ROCK"/"POPS"/"EASY"/ Rock/Pops/Easy/ "TOP40"/"JAZZ" Top 40/Jazz Bass level*2 "BAS L" -8 - +8 Middle level*2 "MID L" -8 - +8 Treble level*2 "TRE L" -8 - +8 Balance "BAL" Left 15 - Right 15 Fader "FAD" Rear 15 - Front 15 Exit Audio Control mode (Volume control mode) • *1 Function of KDC-X491 • *2 You can adjust these items in detail. Refer to (Page 8). (Function of KDC-X491) • *2 Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included) ⁄ About System Q • You can recall the best sound setting preset for different types of music. • Change each setting value with the (page 9). First, select the speaker type with the Speaker setting. • "USER": The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically. 5 Exit Audio Control mode Press any button. Press a button other than the [VOL] knob and [ATT] button. Function of KDC-X491 Adjusting the detail of Audio Control Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail. 1 Select the Basic Audio item Select the desired item to be set in detail from followings; • Bass level • Middle level • Treble level For how to select Basic Audio items, see (page 8). 2 Enter Detail adjustment mode of Audio Control Press the [VOL] knob for at least 1 second. 3 Select the Detail Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Detail Audio item Turn the [VOL] knob. Bass level Adjustment Item Display Bass Center Frequency "BAS F" Bass Q Factor Bass Extend "BAS Q" "B EX" Range 40/50/60/70/80/100/ 120/150 Hz 1.00/1.25/1.50/2.00 OFF/ON Middle level Adjustment Item Middle Center Frequency Middle Q Factor Display "MID F" "MID Q" Range 0.5/1.0/1.5/2.0 kHz 1.0/2.0 Treble level Adjustment Item Treble Center Frequency Display "TRE" Range 10.0/12.5/15.0/17.5 kHz 5 Exit the Detail Audio Control mode Press the [VOL] knob for at least 1 second. ⁄ • When you set the Bass Extend to ON, low frequency response is extended by 20%. • You can exit the Audio Control mode at anytime by pressing any button except for [VOL] knob and [ATT] button. 8 | English