Kenwood KDC-X595 Instruction Manual - Page 7

Audio adjustments Audio control You can adjust following Audio Control items; Display Audio item Range "SubWoofer Level" Subwoofer level -15 - +15 (dB) "Bass Boost" Bass Boost Level1/Level2/OFF "System Q" Preset Equalizer "Rock"/ "Pops"/ "Easy"/ curve "Top40"/ "Jazz"/ "Game"/ "Natural"/ "User"‡ "Bass Adjust" "Bass Center FRQ" Bass Center 40/50/60/70/80/100/ Frequency* 120/150 (Hz) "Bass Level" Bass level -8 - +8 (dB) "Bass Q Factor" Bass Q Factor* 1.00/1.25/1.50/2.00 "Bass EXT" Bass Extend* OFF/ON "Middle Adjust" "Middle Center Middle Center 0.5/1.0/1.5/2.0 (kHz) FRQ" Frequency* "Middle Level" Middle level -8 - +8 (dB) "Middle Q Factor" Middle Q Factor* 1.0/2.0 "Treble Adjust" "Treble Center FRQ" Treble Center Frequency* 10.0/12.5/15.0/17.5 kHz "Treble Level" Treble level -8 - +8 (dB) "Balance" Balance Left 15 - Right 15 "Fader" Fader Rear 15 - Front 15 "2Zone Rear Volume" Rear volume during 0 - 35 Dual zone "SubWoofer" Subwoofer output OFF/ON "Detailed Settings" "HPF Front" Front High Pass Through/40*/60*/80/ Filter 100/120/150/180/220* (Hz) "HPF Rear" Rear High Pass Filter Through/40*/60*/80/ 100/120/150/180/220* (Hz) "LPF SubWoofer" Low Pass Filter 50*/60/80/100*/120/ Through (Hz) "SubWoofer Phase" Subwoofer Phase Reverse (180°)/ Normal (0°) "2Zone" Dual Zone System ON/OFF "2Zone F/R Select" Dual Zone output Rear/Front channel "Supreme" Supreme setting ON/OFF "Audio Preset" Audio Preset memoy† Recall/Memory "Volume Offset Volume offset -8 - ±0 (dB) ADJ" (AUX: -8 - +8) *Function of KDC-X895/ KDC-X595. †Refer to (page 8), (page 8). ‡" User": The customized Bass, Middle, and Treble levels are effective. ⁄ • You can set Bass, Middle, and Treble for each source. About Supreme Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. • About Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - When "2Zone" is set to "ON", the main source sound and AUX input sound are output to the front speakers and rear speakers separately. - Set up the channel of sub source by "2Zone". - Select Main source by [SRC] button. - Adjust the volume of Front channel by Control knob. - Adjust the volume of Rear channel by "2Zone Rear Volume". - The Audio Control has no effect on sub source. - When Bluetooth audio source is selected, set "2Zone F/R Select" to "Rear". "2Zone" cannot be turned "ON" when this is set to "Front". While "2Zone" is turned "ON", "2Zone F/R Select" function is disabled. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio control mode Press the Control knob. 3 Select the Audio item to adjust Turn the Control knob to select the audio item for adjustment and then press the Control knob. Press the [ ] button to return to the previous item. 4 Adjust the Audio item Turn the Control knob to display the value to set, and then press the Control knob. The previous item is displayed. 5 Exit Audio control mode Press the [ ] button for at least 1 second. English | 7