Kenwood KDV-U4449 User Manual - Page 28

Audio Adjustments X'Over Setting You can set a X'Over value for the speakers; Setting item Front High Pass Filter "FRONT" > "FC" Rear High Pass Filter "REAR" > "FC" Front High Pass Slope "FRONT" > "SLOPE" Rear High Pass Slope "REAR" > "SLOPE" Subwoofer Low Pass Filter "SUB-W" > "FC" Subwoofer Low Pass Slope "SUB-W" > "SLOPE" Subwoofer Phase "SUB-W" > "PHASE" Range "THRU"(Through)/ 30/ 40 / 50/ 60/ 70/ 80/ 90/ 100/ 120/ 150/ 180/ 220/ 250 Hz -6/ -12/ -18/ -24 dB/Oct. 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/ 150/ 180/ 220/ 250 Hz/ "THRU" (Through) -6/ -12/ -18/ -24 dB/Oct. REVERSE (180°)/ NORMAL (0°) 1 Enter X'Over setting mode Press [ ] 1 sec., and select "DSP" > "SETUP" > "X'OVER". Press the [AUD] knob. • For how to select Function Control items, refer to (page 10). 2 Select the speaker you want to set Turn the [AUD] knob and push the center. "FRONT"/ "REAR"/ "SUB-W" 3 Select the item you want to set Turn the [AUD] knob and push the center. 4 Set the X'Over value Turn the [AUD] knob and push the center when the desired value is displayed. 5 Exit X'Over setting mode Press the [ ] button twice. DTA (Digital Time Alignment) Setting Adjusting fine tuning of the speaker position compensation value specified at (page 27). 1 Enter DTA setting mode Press [ ] 1 sec., and select "DSP" > "SETUP" > "DTA". Press the [AUD] knob. • For how to select Function Control items, refer to (page 10). 2 Select the speaker you want to set Turn the [AUD] knob and push the center. "FRONT" (Front speaker)/ "REAR" (Rear speaker)/ "SUB-W" (Subwoofer ) 3 Set the compensation value of the speaker position Turn the [AUD] knob and push the center when the desired value is displayed. Adjust between 0 and 440 cm. ✍ Refer to (page 31) on how to set the compensation value. 4 Exit DTA setting mode Press the [ ] button. 28 | KDV-U4349/ KDV-U4349M/ KDV-U4449