Kenwood KMM-BT305 Instruction Manual - Page 31
Removing the unit, Installing the unit in-dash mounting, Installing the unit without mounting sleeve
![]() |
View all Kenwood KMM-BT305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). Hook on the top side Orientate the trim plate as illustrated before fitting. Do the required wiring. (Page 32) Dashboard of your car Use only the specified screws. Using wrong screws might damage the unit. Removing the unit 1 Detach the faceplate. 2 Remove the trim plate. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. Bend the appropriate tabs to hold the sleeve firmly in place. ENGLISH 31
![](/manual_guide/products/kenwood-kmmbt205-instruction-manual-8ba9d78/31.png)