Kenwood KMR-D365BT User Manual - Page 27

DISPLAY SETTINGS TROUBLESHOOTING Default: XX COLOR SELECT*1 Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. 1 Select a zone. ( 22) 2 Select a color for the selected zone. VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*2 To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B]. 1 Press the volume knob to enter the detailed color adjustment. 2 Press S / T to select the color (R/ G/ B) to adjust. 3 Turn the volume knob to adjust the level (0 - 9), then press the knob. DIMMER Dim the display illumination (and button illumination*1). ON: Dimmer is turned on. ; OFF: Cancels. DIMMER TIME: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob. (Default: [ON]: 6:00 PM; [OFF]: 6:00 AM) BRIGHTNESS (For / / ) 1 Select a zone. ( 22) 2 0 - 31: Select your preferred brightness level for display illumination and button illumination. (For / ) 0 - 31: Select your preferred brightness level for display illumination and button illumination. TEXT SCROLL AUTO/ ONCE: Select whether to scroll the display information automatically, or scroll only once. ; OFF: Cancels. *1 For / / . *2 Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/ BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/ GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/ ORANGE2/ ORANGERED Symptom Sound cannot be heard. "MISWIRING CHECK WIRING THEN PWR ON" appears. General "PROTECTING SEND SERVICE" appears. • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. The unit does not work at all. (For ) "SET ERROR" / "DEL ERROR" • Radio reception is poor. • Static noise while listening to the radio. Disc cannot be ejected. Radio CD / USB / iPod Noise is generated. Tracks do not play back as you intended them to play. "READING" keeps flashing. Elapsed playing time is not correct. Remedy • Adjust the volume to the optimum level. • Check the cords and connections. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. Send the unit to the nearest service center. Clean the connectors. ( 26) Reset the unit. ( 3) Setting/deleting the remote control ID is unsuccessful. Turn the power off, then turn on the power and perform the operation again. ( 5) Connect the antenna firmly. Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. ( 3) Skip to another track or change the disc. Playback order is determined when files are recorded. Do not use too many hierarchical levels or folders. This is caused by how the tracks are recorded. ENGLISH 23