Kenwood KRC-208S User Manual - Page 23
The following messages are displayed when certain problems are occurring in your system. Take
View all Kenwood KRC-208S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. E-01 E-02 E-04 No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ] Load the disc magazine properly. No CD in the unit. ] Insert the CD. No disc has been loaded in the disc magazine. ] Load a disc into the disc magazine. No disc has been loaded in the disc magazine. ] Load a disc into the disc magazine. The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. ] Clean the CD and load it correctly. E-10 Nothing has been recorded on the MD. ] The next MD will automatically be played. E-11 No tracks are recorded on the MD, although it has a title. ] The next MD will automatically be played. E-30 The faceplate of the slave unit being connected to this unit has been removed. ] Replace it. E-77 The unit is malfunctioning for some reason. ] Press the reset button on the unit. If the "E- 77" code does not disappear, consult your nearest service center. E-99 E-0d Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. ] Check the disc magazine. And then press the reset button on the unit. If the "E- 99" code does not disappear, consult your nearest service center. The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. - 23 -