Kenwood KRC-25RG User Manual - Page 30
The following messages are displayed when certain problems are occurring in your system. Take
View all Kenwood KRC-25RG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
English Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. EJECT NO DISC No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ] Load the disc magazine properly. No CD in the unit. ] Insert the CD. No disc has been loaded in the disc magazine. ] Load a disc into the disc magazine. E-04 No disc has been loaded in the disc magazine. ] Load a disc into the disc magazine. The CD is very dirty. The CD is upside-down. The CD is scratched a lot. ] Clean the CD and load it correctly. BLANK NO TRACK NO PANEL Nothing has been recorded on the MD. No tracks are recorded on the MD, although it has a title. The faceplate of the slave unit being connected to this unit has been removed. ] Replace it. E-77 The unit is malfunctioning for some reason. ] Press the reset button on the unit. If the "E- 77", code does not disappear, consult your nearest service centre. E-99 Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. ] Check the disc magazine. And then, press the reset button on the unit. If the "E- 99" code does not disappear, consult your nearest service center. HOLD The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc starts playing again. - 30 -