Kenwood KRC-25RG User Manual - Page 6
Switching Modes, Loudness, Audio Control Setting, Turning Loudness On/Off, Selecting the standby mode
View all Kenwood KRC-25RG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English General features Switching Modes Switching Modes: Each time you press the SRC button, the mode switches as follows: w Tuner mode w Tape mode w External disc control mode 1 (KRC-279RA/279RG/25RA/25RG only) w External disc control mode 2/AUX mode (KRC-279RA/279RG/25RA/25RG only) w Standby mode Selecting the standby mode: • Press the SRC button repeatedly to select to "ALL OFF" . When "ALL OFF" is displayed, the standby mode is turned on. The standby mode turns all functions off although leaving the unit's power on. Use this mode when you want to have the display illuminated but do not want to listen to anything. • If you have selected Standby mode, the timer function that turns the power OFF automatically will be activated. To find out how to set the time on the timer, and how to cancel the timer function, refer to the section on the Power OFF Timer function under Menu Settings (page 21). NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • The AUX mode is available only when the changer / AUX switching adapter (KCA-S210A or CA-C1AX) or CD changer (KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected to this unit. During the AUX mode, "AUX" will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode. Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is on. Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off. Audio Control Setting Adjust various parameters of sound quality. 1 Press the AUD button to enter the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. NOTE Source tone memory Each source (tape, FM, AM, and disc changer) has its own memory in which to store the bass and treble tone settings. The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.). 3 Adjust each mode Press the 4/¢ button. Please refer to the following for the adjusting values. 4 Press the AUD button to end the control mode. -6-