Kenwood KRC-269 User Manual - Page 6

English General features Volume Increasing Volume Press the [u] button. Decreasing Volume Press the [d] button. Attenuator Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed the Attenuator turns ON or OFF. When it's ON, the "ATT" indicator blinks. 2 Enter Control mode Press the [AUD] button. 3 Select the Sound type Press the [#1] - [#5] button. Press button Sound setting Display [#1] Flat "DB-1" [#2] Rock "DB-2" [#3] Pops/ Top40 "DB-3" [#4] Jazz "DB-4" [#5] Easy "DB-5" When the dB(Sound Coordinate) setting is changed, the Bass and Treble set in audio control replace the dB(Sound Coordinate) values. 4 Exit Control mode Press the [AUD] button. Loudness Compensating for low and high tones during low volume. Press the [LOUD] button for at least 1 second. Each time the button is pressed for at least 1 second the Loudness turns ON or OFF. When it's ON, "LOUD" indicator is ON. dB (Sound Coordinate) You can recall the best sound setting preset for different types of the music. 1 Select the source to set Press the [SRC] button. Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [A.ADJ] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below. 4 Adjust the Audio item Press the [4] or [¢] button. -6-