Kenwood KVT-815DVD Installation Manual - Page 4

English Connection 2WARNING If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. Do not connect. Monitor unit Connect to the vehicle's parking brake detection switch harness using the supplied relay connector. 2 CAUTION For the sake of safety, be sure to connect the parking sensor. PRK SW Wiring harness (Accessory 3) C Ground wire (Black) - (To car chassis) ( 5A ) B Battery wire (Yellow) A Ignition wire (Red) Accessory 4 Accessory 2 FM/AM antenna input Ignition key switch B Battery wire (Yellow) Dimmer control wire (Orange/White) To car light control switch Car fuse box (Main fuse) + Battery -+ ACC A B Car fuse box C C Ground wire (Black) - (To car chassis) Depending on what antenna you are using, Motor antenna control wire connect either to the control terminal of the motor (Blue) antenna, or to the power terminal for the booster amplifier of the film-type antenna. Power control wire When using the optional power amplifier, (Blue/White) connect to its power control terminal. External amplifier control wire To "EXT.AMP.CONT." terminal of the amplifier (Pink/Black) having the external amp control function. 4 English