Kenwood KW85 Use and Care Guide - Page 9

GB/KW85 18-11-2003 14:02 Pagina 9 Installation CHOOSING THE INSTALLATION SITE Position the air conditioning unit on a flat surface where the air outlet grilles cannot be obstructed. Position the appliance at least 50 cm (19.7") away from walls or obstacles. INSTALLING THE AIR EXHAUST HOSE 1. Open out the end of the hose and screw the two adapters on counterclockwise (see figure). 2. Fit the square adapter on the air exhaust hose to the air exhaust outlet on the appliance. 3. Connect the other end (flange) to the nearest window. Important: the air exhaust hose must be between 500 mm (19.7") and 2000 mm (78.7") long. You are recommended to keep the air exhaust hose as short as possible. During installation, keep the hose as horizontal as possible without distorting it. Do not connect the terminal to other exhaust ducts (flue Flange square adapter CABLE WINDER Before installing the air exhaust hose, mount the two cable winder brackets using the screws supplied as shown in the figure. air exhaust outlet or chimney) as this could lead to malfunction. 130 cm (51.18 in) AIR EXHAUST ACCESSORIES hose length 500 mm (19.7") 2000 mm (78.7") adapter for flange flange 40 cm (15.7 in) adapter crosspiece 675 mm (26.5") - 1230 mm (48.4") (some models only) Correct wall installation: the hole must be at a height of between 40 cm (15.7") and 130 cm (51.18") from the floor. 9