Kenwood MPV7019 Instruction Manual - Page 22

Menu system English Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice. Press the Reset button and when it's removed from the battery power source 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. "APPROVED" is displayed. The unit can be used. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security"/ "SECURITY" is displayed. 3 Enter Security Code mode Press the [4] or [¢] button for at least 1 second. When "ENTER" is displayed, "CODE" is displayed. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep ON"/ "BEEP ON" "Beep OFF"/ "BEEP OFF" Setting Beep is heard. Beep canceled. 4 Select the digits to enter Press the [4] or [¢] button. 5 Select the Security Code numbers Press the [FM] or [AM] button. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the [¢] button for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is displayed. 8 Do the step 4 through 7 operation, and reenter the Security Code. "APPROVED" is displayed. The Security Code function activates. Manual Clock Adjustment 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the [4] or [¢] button for at least 1 second. The clock display blinks. 3 Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [4] or [¢] button. When the wrong Code is entered in steps 4 through 6, repeat from step 4. 4 Exit Clock adjustment mode Press the [MENU] button. - 22 -