Kenwood PKT-23LF Operation Manual - Page 19
Channel, Number, Voice Announcement, Number of times LED, blinks
View all Kenwood PKT-23LF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Channel Number 13 14 15 16 LED Purple Voice Announcement Number of times LED blinks "Thirteen" 1 "Fourteen" 2 "Fifteen" 3 "Sixteen" 4 • Press the PF-2 key to switch between Volume Adjustment mode and Channel Select mode. 2 To make a call, press and hold the PTT switch, then speak into the microphone using your normal speaking voice. • Hold the microphone approximately 1.5 inches (3 to 4 cm) from your mouth. 3 Release the PTT switch to receive. Note: ◆◆ When the battery pack voltage becomes too low, transmission will stop and an alert tone will sound. (Low Battery Warning: While operating the transceiver, the Low Battery Warning sounds an alert tone every 30 seconds and the LED indicator blinks red when the battery needs recharged or replaced.) ◆◆ Even when setting the volume to 0, the transceiver will continue to emit beep sounds and channel announcements. ◆◆ Continuously transmitting when the transceiver becomes too hot will cause the output power to decrease and may eventually stop transmission. Stop transmitting for a while to allow the transceiver to cool down. ◆◆ You may sometimes hear noise during communications, depending on the caller's transceiver. 19