Kenwood PKT-23LF Operation Manual - Page 28
Key Assignment Mode
View all Kenwood PKT-23LF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
KEY ASSIGNMENT MODE This transceiver allows you to reprogram the PF-1 key (press/hold) and PF-2 key (hold only) with any of the functions listed in the table below. Explanations on the use of each function are provided under "Programmable Functions". Table Number Function Name 0 None (no function) 1 Low Transmit Power 2 Monitor 3 Scan 4 Squelch Off 5 Super Lock-C 6 Super Lock-P 7 Tone Alert To change the functions of the PF-1 and PF-2 keys: 1 With the transceiver power OFF, press and hold the Up and PF-2 keys while turning the transceiver power ON. • Continue to hold the Power switch, Up key, and PF-2 key until the LED indicator lights yellow and the transceiver announces "Setup". 2 Release the Power switch, Up key, and PF-2 key. • The transceiver announces "Table Zero". 3 Press the Up/Down keys to increment/ decrement the number, to select the new key function. • Table numbers and their corresponding functions are provided in the table above. • A voice announcement will inform you of the currently selected Table number. 4 Press the PF-1 key or hold the PF-1 or PF-2 key to program the new function onto the desired key. • A tone sounds after pressing the PF-1 key, confirming that the function has been stored to the PF-1 press operation. • Two tones sound after holding the PF-1 key, confirming that the function has been stored to the PF-1 hold operation. 28