Kenwood S210P Instruction Manual - Page 16

CD/MP3 features Program Play Plays the selected songs only in order. Direct Skip Play Directly calls the song you want to play. 1 Stop playback Press the [7] button. 1 Enter the Track, File, or Folder number you want to play Press the [0] - [9] button. 2 Enter the Program mode Press the [PROG] button. Switches "PLAY MODE" displayed at the bottom of the screen to "PROGRAM PO" during MP3 playback. 2 Play Press the [ENTER] button. • If you do not perform the operation of Step 2 for about 5 seconds, the song entered in Step 1 is automatically searched for. 3 Select the song you want to play Press the [2]/[5]/[3]/[∞] (during MP3 playback only) or [0] - [9] button. Specifies the file containing the song you want to play. 4 Finalize the song you want to play Press the [ENTER] button. The song selected in Step 3 is registered as Program number 1. Play Time Search [CD] Enter the play time to start from where you want. 1 Enter the Play Time Search mode Press the [SEARCH] button. 5 Repeat Steps 3 and 4 to register all the songs you want to program play. For MP3, if you have finished programming, press the [7] button to exit the Program mode. 2 Enter the play time where you want to start Press the [0] - [9] button. For example 5:07 ➪ [0], [5], [0], [7] Starts playing from the time you entered. 6 Start Program Play Press the [38] button. Plays the registered songs in order. Canceling Program Play for CD Press the [7], [PROG] and [ENTER] buttons in order. Canceling Program Play for MP3 Press the [7] and [PROG] buttons in order. 16 | English