Kenwood S210P Instruction Manual - Page 21

Accessories 1 Installation Installation using the Brackets Tapping Screw 5 ...1 2 ...1 3 Bracket 3 Semusu Screw 4 Installation using the velcro tapes ...2 4 ...5 5 Carpet Velcro tape 6 ...4 6 ...2 7 • Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. • Do not install the unit to an unatable place and a place where it vibrates. • You can mount the unit at any angle between the regular horizontal position and the vertical position on its back (0° through 90°). You cannot mount the unit with the disc slot facing downwards, angled or upside down. ...1 • If the fuse blows, first make sure that the wires have not caused a short circuit, then replace the old fuse with one with the same rating. English | 21