Kenwood TH-K40 Operation Manual - Page 53
Power On Message
View all Kenwood TH-K40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Note: ◆ While Tone Alert is ON, there is no speaker output when a signal is received. To monitor the signal, press and hold [MONI]. ◆ When Tone Alert is ON, APO does not turn the power OFF. ◆ If you switch the transceiver OFF while the " " icon is blinking, the transceiver does not back up the elapsed time. ◆ When Tone Alert is ON, you can use only the following keys: [ ], [MONI], [SQL], and [LAMP]. POWER ON MESSAGE You can change the Power ON Message (a maximum of 6 characters) when the transceiver is turned ON. 1 Enter Menu mode and access Menu No. 1 (P.ON.MSG), then press [F]. • A blinking cursor appears. 2 Rotate the ENC control to select a character. • You can enter the following alphanumeric characters: 0 ~ 9, A ~ Z, - (hyphen), / (slash) and a space. 3 Press [MR]. • The cursor will move to the next digit. • You can move the cursor to the left or right by pressing [VFO] or [MR]. • Press [CALL] to delete the character at the current cursor position. 4 Repeat steps 3 and 4 to enter up to 6 digits. • Press [CALL] to delete the character at the current cursor position. 5 Press [F] to store the message. 6 Press [MENU] or [PTT] to exit Menu mode. Note: If the Power ON Message is deleted, "TH-K20" or "TH-K40" is displayed. 45