Kenwood TH-K40 Operation Manual - Page 54
Beep Function, Lock Type
View all Kenwood TH-K40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
BEEP FUNCTION The Beep function provides confirmation of entry, error status, and malfunctions of the transceiver. We recommend you leave this function ON in order to detect erroneous operations and malfunctions. However, to turn the beep function OFF: 1 Enter Menu mode and access Menu No. 2 (BEEP), then press [F]. 2 Rotate the ENC control to select "OFF", then press [F] to store the setting. 3 Press [MENU] or [PTT] to exit Menu mode. The transceiver generates the following warning beeps even if the beep function is turned OFF. • APO warning beeps • Time-Out Timer warning beep Note: The beep output level is linked to the volume control position. LOCK TYPE You can select your desired Lock type. "KEY" locks the operational keys, "FRQ" locks the frequencies so that you do not accidentally change them and "KEY.FRQ" locks both the keys and the frequencies. • Manual DTMF and Autodial can still be performed while either lock is active. 1 Enter Menu mode and access Menu No. 3 (LOCK), then press [F]. 2 Rotate the ENC control to select "KEY", "FRQ" or "KEY.FRQ", then press [F] to store the setting. 3 Press [MENU] or [PTT] to exit Menu mode. "KEY": Only the following keys & controls can be operated. PWR/VOL control MONI SQL LAMP ENC control PTT F "FRQ": Only the following keys can be operated. PWR/VOL control PTT MONI F MENU TONE LOW SQL T.SEL PF LAMP • You can still use the ENC control in menu mode. 46