Kenwood TH-K4E User Manual - Page 47
Selecting an Offset Frequency
View all Kenwood TH-K4E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
1 Press [MENU]. 2 Turn the Tuning control to select Menu No. 6 (SFT). 3 Press [MENU]. 4 Turn the Tuning control to select "+" or "-". • To program a -7.6 MHz offset (TH-K4E only), select "-7.6" instead. 5 Press [MENU] to store the setting or [PTT] to cancel. • "+" or "-" (or " ") appears above the frequency, indicating which offset direction is selected. If the offset transmission frequency falls outside the allowable range, transmission is inhibited. In this case, adjust the reception frequency so that the transmission frequency is within the band limits. Note: While using an odd-split memory channel or transmitting, you cannot change the offset direction. s Selecting an Offset Frequency To access a repeater which requires an odd-split frequency pair, change the offset frequency from the default which is used by most repeaters. The default offset frequency on the 2 m band is 600 kHz (all TH-K2 models); the default on the 70 cm band is 5.0 MHz (TH-K4AT) or 1.6 MHz (TH-K4E). 33