Kenwood TK-3130 Instruction Manual - Page 12

ENGLISH 4 CHANNEL SCANNING 1 When you want to scan all channels for a signal, press the MODE key momentarily, three times. • The FRS, CH, and SCAN icons blink and the transceiver scans the channels from channel 1 to 14. • All channel codes are turned off during scan. 2 When a signal is found on a channel, scan will pause at that channel for 10 seconds. • To resume scanning before the 10 second timer elapses, press the v or w key. 3 To end scan and return to normal operation, press the PTT switch. 5 CODE SCANNING 1 When you want to scan all code settings on a single channel, press the MODE key momentarily, four times. • The FRS, SUB, and SCAN icons blink and the transceiver scans the codes from code 01 to 38. 2 When a signal is found at a code setting, scan will pause at that code for 10 seconds. • To resume scanning before the 10 second timer elapses, press the v or w key. 3 To end scan and return to normal operation, press the PTT switch. UBZ-GR14 E 1-20 9 9 01.4.12, 9:35 AM