Kenwood TK-3130 Instruction Manual - Page 8

ENGLISH INSTALLING/ REMOVING OPTIONAL ACCESSORIES Note: Always switch OFF the transceiver power when installing or removing the optional accessories. The following accessories can be used with this transceiver: • SMC-34 Speaker-Microphone • HMC-3 Headset • EMC-3 Clip Microphone with Earphone To install these accessories: 1 Open the MIC-SP tabs on the top of the transceiver. 2 Insert the accessory's plugs into the MIC-SP jacks. 3 When you remove the accessory from the transceiver, be sure to cover the MIC-SP jacks with the attached tabs in order to keep dust and dirt away from the contacts. Note: x Refer to the accessory instruction manuals for detailed instruction on each of the accessories. x The 3 programmable function keys on the SMC-34 cannot be used with this transceiver. To use the speaker-microphone, press the PTT switch to transmit and release it to receive. You can also adjust the volume level using the SMC-34 Volume control. UBZ-GR14 E 1-20 5 5 01.4.12, 9:35 AM