Kenwood TK3101K2 Instruction Manual - Page 13

background, noise., Release

Page 13 highlights

GETTING ACQUAINTED Antenna Microphone Speaker Speaker/ microphone jacks PTT (Push-To-Talk) switch Press this switch, then speak into the microphone to call a station. Release the switch to receive. C) Monitor key Press and hold this key to turn the squelch OFF. You will hear background noise. Release the key to turn the squelch back ON. ® Channel selector Rotate to select channels 1 - 15. ® LED indicator Lights red while transmitting, green while receiving a signal, and orange while in setup mode. Flashes red when the battery voltage is low while transmitting. Power switch/ Volume control Turn clockwise to switch ON the transceiver. Turn counterclockwise until a click sounds, to switch OFF the transceiver. Rotate to adjust the volume level. 6 t.,1 % e..- ;:zommmo.m.mu•wk.7k.,,x4 afacpm

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

You
will
hear
background
noise.
Release
the
key
to
6
t
.
,1 %
e..-
;:zommmo.m.mu•wk.7k.,,x4
afacpm