Kenwood VR 3080 Service Manual - Page 2

KRF-V7772D/VR-3080 CONTENTS / ACCESSORIES Contents CONTENTS/ACCESSORIES/CAUTIONS 2 CONTROLS 3 DISASSEMBLY FOR REPAIR 4 BLOCK DIAGRAM 5 CIRCUIT DESCRIPTION 6 ADJUSTMENT 12 WIRING DIAGRAM 13 PC BOARD 14 SCHEMATIC DIAGRAM 19 EXPLODED VIEW 36 PARTS LIST 37 SPECIFICATIONS 49 Accessories PowerPad Remote (A70-1191-05) : RC-R0907 ENTER VOLUME MUTE CONFIRM ON/STANDBY Battery cover(A09-1115-08) Batteries AM Loop Antenna (T90-0833-05) AM Antenna Base AC plug adapter (E03-0115-05) Use to adapt the plug onthe power cord to the shape of the wall outlet. (Present only for regions where use is necessary.) FM Antenna (T90-0841-05) RESET Resetting PowerPad If you want to reconfigure PowerPad, you can reset it. You do not need to do this unless you experience a problem. 1. Open the cover and remove the batteries, 2. Use a pen or other thin-tipped object to press the blue button in the center of the battery case: OPEN 3. Reinstall the batteries and follow the instructions in this chapter to set up PowerPad again. 2 Receiver If none of the above solutions work, reset the microprocessor: (For USA and Canada) 1. Turn the receiver off. 2. Unplug the receiver. 3. Plug it back in while pressing and holding the Power button (you may need someone else to help you do this) 4. Continue to hold the Power button for more than 1 second. (For Other Countries) 1. Turn the receiver off. (The Power button is OFF position.) 2. Press ON/STANDBY button while pressing and holding the Power button. 3. Continue to hold the Power button for more than 1 second.