Kenwood VR-6050 User Manual - Page 21

Normal playback Preparing for playback Some preparatory steps are needed before starting playback. POWER ON/STANDBY (VR-6050) A SPEAKERS B ON/STANDBY (KRF-V7060D/V6060D) INPUT MODE Listening to a source component VOLUME CONTROL Input Selector AV AUX POWER ON/OFF MD/TAPE (KRF-V7060D/V6060D) Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing the POWER ON/STANDBY (for VR-6050) key or POWER ON/OFF and ON/STANDBY (for KRF-V7060D/V6060D) key. Selecting the input mode If you have selected a component connected to the CD/DVD, VIDEO 2 or DVD/6CH jacks, make sure that the input mode setting is correct for the type of audio signal to be used. 9 Selecting MD/TAPE Select the source name corresponding to the component connected to the MD/TAPE jacks. The initial factory setting is "TAPE". To change the source to "MD", follow the steps below: Hold down the MD/TAPE key for more than 2 seconds. • The source indication changes to "MD". • To return to the original indication, repeat the above procedure. Selecting the speaker system Press the A SPEAKERS B key to select the speaker system to be used. A ON : B ON : A+B ON : A+B OFF : Sound from the speakers connected to the SPEAKERS A terminals on the rear panel. Sound from the speakers connected to the SPEAKERS B terminals on the rear panel. No sound will be heard from the subwoofer. Sound from both the speakers connected to the SPEAKERS A and B terminals on the rear panel. No sound from the speakers. Use this setting when listening with headphones for stereo sound in all playback modes. The display segments are different depending on the type of input signal. The indicator for the speakers you want to use should be lit. SP MUTE OPTICAL 6CH INPUT AUTO DETECT CINEM ACTIV L C SW R A B CLIP COAXIAL ANALOG 96kHzfs DSP M LFE SL S SB SR • Selecting "6CH INPUT" by pressing the INPUT MODE key, whereby "DVD/6CH" is the input source will cause SPEAKERS A to be selected automatically. VOLUME / INPUT SELECTOR 1 Use the Input Selector and AV AUX keys to select the source you want to listen to. Selecting a source using each key. VR-6050/KRF-V7060D/V6060D 1 "DVD/6CH" 2 "CD/DVD" 3 "AUX" or "PHONO" (for KRF-V7060D only) 4 "TUNER" 5 "VIDEO 1" 6 "VIDEO 2" 7 "VIDEO 3" 8 "MD/TAPE" 9 "AV AUX" KRF-V6060D (for the U.K. only) 1 "DVD/6CH" 2 "CD/DVD" 3 "PHONO" 4 "TUNER" 5 "VIDEO 1" 6 "VIDEO 2" 7 "VIDEO 3" 8 "MD/TAPE" 9 "AV AUX" 2 Start playback from the selected source. 3 Use the VOLUME CONTROL knob or VOLUME +/- keys to adjust the volume. 21 EN