Kenwood VR-716 User Manual - Page 27

Center Width mode Pro Logic, Panorama mode Pro Logic

Page 27 highlights

Ambience effects 2 Use the MULTI CONTROL knob or Multi %/fi keys to select the ON or OFF setting. • Some Dolby Digital software may not be compatible with the Midnight mode. Panorama mode (Pro Logic II Music mode only) When listening to music, you will be able to enjoy the "wraparound" sound effect when you adjust the panorama mode. 1 Press the SOUND key repeatedly until "PANORAMA" appears on the display. • The PANORAMA setting indication scrolls across the display. "PANORAMA" will be scrolled from right to left. Center Width mode (Pro Logic II Music mode only) Center Width adjustment allows you to enjoy an enchanced sound when listening to music through center image from only center speaker, or left and right speakers or various combinations adjustments. 1 Press the SOUND key repeatedly until "CENTER WIDTH" appears on the display. • The CENTER WIDTH indication scrolls across the display. • When the center speaker is switched OFF, this mode will not be effective. 2 Use the MULTI CONTROL knob or Multi % / fi to adjust the left- center-right output. Center image will be heard from center speaker only. Center image will be heard from left and right speakers only. 2 Use the MULTI CONTROL knob or Multi % / fi keys to select PANORAMA ON or OFF. 1 ON : PANORAMA mode is ON. 2 OFF : PANORAMA mode is OFF. Dimension mode (Pro Logic II Music mode only) When listening to music with certain recordings, you will also be able to achieve a suitable balance from all the speakers by adjusting the dimension mode. 1 Press the SOUND key repeatedly until "DIMENSION" appears on the display. • The DIMENSION indication scrolls across the display. 2 Use the MULTI CONTROL knob or Multi %/fi keys to adjust the soundfield towards the rear or the front. Soundfield is adjusted towards the front. • When in other positions, center image from center speaker, left and right speakers can be heard simultaneously with various combinations. Display dimmer adjustment The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music. Each time you press the DIMMER key, the display brightness changes among the three available settings. Select the brightness level you find most pleasing. Soundfield is in neutral position. Soundfield is adjusted towards the rear. 96kHz LPCM playback The receiver is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode to "STEREO". • In F-AUTO input mode, the listen mode will automatically be STEREO. • When in D-MANUAL input mode (listen mode is not STEREO), "FS 96kHz" will appear in the display and no sound can be heard from the speakers. Press the LISTEN MODE key (the listen mode changes to the STEREO mode) to output sound from the speakers. 27 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

27
EN
Center Width mode (Pro Logic
II
Music mode only)
Center Width adjustment allows you to enjoy an enchanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
1
Press the SOUND key repeatedly until “CENTER WIDTH” appears
on the display.
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not be
effective.
2
Use the MULTI CONTROL knob or Multi
%
/
to adjust the left-
center-right output.
Center image will be heard from center speaker only.
Center image will be heard from left and right speakers only.
• When in other positions, center image from center speaker, left
and right speakers can be heard simultaneously with various
combinations.
Ambience effects
2
Use the MULTI CONTROL knob or Multi
%
/
keys to select the
ON or OFF setting.
• Some Dolby Digital software may not be compatible with the
Midnight mode.
Panorama mode (Pro Logic
II
Music mode only)
When listening to music, you will be able to enjoy the “wraparound”
sound effect when you adjust the panorama mode.
1
Press the SOUND key repeatedly until “PANORAMA” appears on
the display.
• The PANORAMA setting indication scrolls across the display.
“PANORAMA” will be scrolled from right to left.
2
Use the MULTI CONTROL knob or Multi
%
/
keys to select
PANORAMA ON or OFF.
1
ON
:
PANORAMA mode is ON.
2
OFF :
PANORAMA mode is OFF.
Dimension mode (Pro Logic
II
Music mode only)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1
Press the SOUND key repeatedly until “DIMENSION” appears on
the display.
• The DIMENSION indication scrolls across the display.
2
Use the MULTI CONTROL knob or Multi
%
/
keys to adjust
the
soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
Soundfield is in neutral position.
Soundfield is adjusted towards the rear.
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the display brightness
changes among the three available settings. Select
the brightness
level you find most pleasing.
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to “STEREO”.
• In
F-AUTO
input mode, the listen mode will automatically be STEREO.
• When in
D-MANUAL
input mode (listen mode is not STEREO), “FS
96kHz” will appear in the display and no sound can be heard from the
speakers.
Press the LISTEN MODE key (the listen mode changes to the STEREO
mode) to output sound from the speakers.