KitchenAid K45WSSWH Use & Care Guide - Page 13
Warning
View all KitchenAid K45WSSWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH ASSEMBLING YOUR TILT-HEAD STAND MIXER WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Pin To Attach Flat Beater, Wire Whip, or Dough Hook 1. Turn speed control to OFF. 2. Unplug Stand Mixer or disconnect power. 3. Tilt motor head back. 4. Slip beater onto beater shaft and press upward as far as possible. 5. Turn beater to right, hooking beater over pin on shaft. 6. Plug into a grounded 3 prong outlet. To Remove Flat Beater, Wire Whip or Dough Hook 1. Turn speed control to OFF. 2. Unplug Stand Mixer or disconnect power. 3. Tilt motor head back. 4. Press beater upward as far as possible and turn left. 5. Pull beater from beater shaft. Off On To Attach Bowl 1. Turn speed control to OFF. 2. Unplug Stand Mixer or disconnect power. 3. Tilt motor head back. 4. Place bowl on bowl clamping plate. 5. Turn bowl gently into clockwise direction. 6. Plug into a grounded 3 prong outlet. To Remove Bowl 1. Turn speed control to OFF. 2. Unplug Stand Mixer or disconnect power. 3. Tilt motor head back. 4. Turn bowl counterclockwise. Continued on next page 11