KitchenAid KBFN502EPA Installation Guide - Page 13
Overlay Series Custom Panels and Handle Kits
View all KitchenAid KBFN502EPA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Overlay Series Custom Panels and Handle Kits Custom overlay panels allow you to blend the exterior of your refrigerator into the overall kitchen décor, and to use custom handles for additional design flexibility. Decorative Overlay Panel The custom panels must have backer panels attached in order to mount them to the refrigerator. It is most common to work with three panels, as shown in the following graphic: a decorative overlay panel, a ¹/₈" (3.18 mm) spacer panel or spacer strips and a ¹/₄" (6.35 mm) backer panel. 7¹⁄₄" (18.4 cm) C Grille Panel In some cases, your cabinet manufacturer may choose to work with one panel routed for the different dimensions. Follow these panel dimension and placement instructions to be sure that the custom overlay panels will fit properly. A A B IMPORTANT: ■ The weight of the refrigerator door overlay panel cannot exceed 50 lbs (23 kg). ■ The weight of the freezer door overlay panel cannot exceed 40 lbs (18.1 kg). Preferred Radius ¹⁄₂" (1.27 cm) Freezer Door Panel (Dispenser) * ■ The weight of the top grille overlay panel cannot exceed 10 lbs (4.5 kg). To minimize panel weight, you may use 2" (5.08 cm) spacer strips around the perimeter in place of full-sheet solid spacer panels. The spacer strips must be set in at least 1" (2.54 cm) from the top, bottom and sides edges of the backer panel. If you use spacer strips, it is also recommended that you use two 2" (5.08 cm) strips horizontally centered for added support. Overlay Panel Spacer Panel Spacer Panel ¹⁄₈" (3.18 mm) Overlay Panel 14¹⁄₄" (36.2 cm) 10⁷⁄₈" (27.6 cm) 72¹⁄₄" Freezer (183.5 cm) Door Panel (Non-Dispenser) 33⁷⁄₈" (86.0 cm) Dispenser cutout is centered left-to-right Refrigerator Door Panel ⁵⁄₈" to ³⁄₄" (15.88 to 19.05 mm) Backer Panel 6.35 mm) (3.18 mm) Backer Panel 1" minimum (2.54 cm) Door/Grille Trim Offset Dimension Model A B C 36 14³/₄" (37.47 cm) 19³/₄" (50.17 cm) 34³/₄" (88.27 cm) 42 17¹/₄" (43.82 cm) 23¹/₄" (59.06 cm) 40³/₄" (103.51 cm) 48 19³/₄" (50.17 cm) 26³/₄" (67.95 cm) 46³/₄" (118.75 cm) *Represents placement of dispenser frame. 13