KitchenAid KBLS19KCMS Use & Care Guide - Page 4

INSTALLATION INSTRUCTIONS Tools and Parts TOOLS NEEDED: Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. ■ Cordless drill ■ Scissors and ³⁄₈" Brad point doweling drill bit ■ Phillips screwdriver ■ Rotary tool ■ Masking tape ■ Tape measure ■ Petroleum jelly PARTS NEEDED: Custom Overlay Frame-See "Overlay Frame-Rear View." Hardware (Optional) PARTS SUPPLIED: ■ Flat-head screws (8) ■ Overlay plates (2) ■ Round-head screws (8) ■ Overlay hooks (4) Custom Overlay Frame If you plan to install a custom overlay frame, you will need to create the frame yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for frame specifications. IMPORTANT: ■ The thickness of the overlay frame must be ³⁄₄" (19 mm). ■ The overlay frame must not weigh more than 10 lbs (4.54 kg). Overlay frames weighing more than recommended may cause damage to your appliance. Overlay Frame Dimensions-Rear View 1. Create a custom overlay frame using the dimensions shown. 2. Rout four depressions into the overlay frame, where indicated, to attach the overlay hooks. NOTE: To inlay the overlay hooks into the panel, it is recommended that you use a rotary tool to rout the surface where the overlay hooks will be placed. 4⁷⁄₈" (124 mm 23.3 mm) 20 mm) 3 90 mm) A 2 75 mm) 2 mm) 29 75.8 cm) 10 mm) 3" (76 mm) 23⁵⁄₈" (60.0 cm) A. Overlay hook locations Install Overlay Hooks Using a Phillips screwdriver and eight flat-head screws, attach the overlay hooks to the back of the overlay frame. See "Overlay Frame-Rear View" for overlay hook locations. A A. Overlay hooks (4) 4