KitchenAid KBMS1454SSS Installation Guide - Page 3

Minimum Dimensions - installation

Page 3 highlights

Minimum Dimensions Minimum Installation Clearances For proper installation, the following minimum clearances must exist above and below the cutout opening. Above Cabinet/Storage Drawer Installation Above Oven/Warming Drawer Installation 1" (2.5 cm) A 1" (2.5 cm) 1¹⁄₂" (3.8 cm) 1" (2.5 cm) Below Counter Installation B 3" (7.6 cm) C Below Built-in Cooktop Installation D 3" (7.6 cm) See note below. 1¹⁄₂" (3.8 cm) E F 1¹⁄₂" (3.8 cm) A. Upper cabinet B. Lower cabinet or storage drawer C. Lower oven or warming drawer D. Built-in cooktop (non-vented) E. Storage drawer F. Toe kick NOTE: The bottom of the cooktop may be sunk into the counter and lower cabinet. The minimum 3" (7.6 cm) clearance must exist below the lowest point of the cooktop, and there must be no interference between any part of the cooktop (including any gas fittings) and the microwave oven. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

3
Minimum Dimensions
Minimum Installation Clearances
For proper installation, the following minimum clearances must exist above and below the cutout opening.
NOTE:
The bottom of the cooktop may be sunk into the counter and lower cabinet. The minimum 3" (7.6 cm) clearance must exist
below the lowest point of the cooktop, and there must be no interference between any part of the cooktop (including any gas fittings)
and the microwave oven.
Above Cabinet/Storage Drawer Installation
Above Oven/Warming Drawer Installation
Below Counter Installation
Below Built-in Cooktop Installation
A. Upper cabinet
B. Lower cabinet or storage drawer
C. Lower oven or warming drawer
D. Built-in cooktop (non-vented)
E. Storage drawer
F. Toe kick
1"
(2.5 cm)
1
¹⁄₂
"
(3.8 cm)
1"
(2.5 cm)
3"
(7.6 cm)
A
B
C
1
¹⁄₂
"
(3.8 cm)
1
¹⁄₂
"
(3.8 cm)
1"
(2.5 cm)
3"
(7.6 cm)
D
E
F
See note
below.