KitchenAid KBZU122VSS Use & Care Guide - Page 16
Assemble Cooking Area
UPC - 883049184401
View all KitchenAid KBZU122VSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1. Plug the single-prong plug into the receptacle on the left underside of the side burner. A A. Single-prong plug 2. Locate or build a noncombustible surface inside the island cabinet to mount the power transformer. It must be to the left side of the side burner at a minimum of 3" (7.6 cm) from the side and 4" (10.2 cm) below the bottom of the side burner. 3. Mount the power transformer to the mounting surface using 4 #8 screws (not supplied) that are the proper type and length for the transformer and the mounting surface. It must be mounted with the wire for the single-prong plug upward or toward the side burner. NOTE: The cord must be properly mounted with a cord retention device so that its 3-prong plug will not touch the ground when it is unplugged. 4. Gently slide the side burner completely into the outdoor enclosure. WARNING ■ Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts. ■ Do not operate any outdoor cooking gas appliance with a damaged cord, damaged plug, or after the appliance malfunctions or has been damaged in any manner. Contact the manufacturer for repair. ■ Do not let the cord hang over the edge of a table or touch hot surfaces. ■ Do not use an outdoor cooking appliance for purposes other than intended. ■ When connecting, first connect plug to the outdoor cooking gas appliance then plug appliance into the outlet. ■ Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance. ■ Do not remove the ground prong or use with an adapter of 2 prongs. Assemble Cooking Area 1. Lift off cover and grate and set aside. A B Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. A. Cover B. Grate 2. Remove packing from around burners. 3. Reinstall grate. 4. Dispose of/recycle all packaging materials. 5. Gently slide side burner completely into outdoor enclosure. 6. Go to the "Check and Adjust the Burners" section. 5. Plug 3-prong power cord plug into a grounded 3-prong GFI outlet. ■ To avoid electrical shock, do not immerse cord or plugs in water or other liquid. 16