KitchenAid KDRS505XSS Use & Care Guide - Page 7

Sealed Surface Burners - lowes

Get KitchenAid KDRS505XSS PDF manuals and user guides
UPC - 883049199245
View all KitchenAid KDRS505XSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Use the following chart as a guide when setting heat levels. SETTING RECOMMENDED USE Hi ■ Start food cooking. ■ Bring liquid to a boil. Medium High ■ Hold a rapid boil. ■ Quickly brown or sear food. Medium ■ Hold a slow boil. ■ Fry poultry or meat. Medium Low ■ Stew or steam food. ■ Cook pudding, sauce, icing or gravy. Lo ■ Keep food warm. ■ Simmer. Sealed Surface Burners IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges. Burner Cap Alignment Always keep the burner cap properly fitted in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the "General Cleaning" section. Standard Burner Burner ports Check burner flames occasionally for proper size and shape as shown below. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports. Standard Burner A B A. 1-1¹⁄₂" (25-38 mm) B. Burner ports To Clean: IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners, bleach or rust removers. 1. Remove the burner cap from the burner base and clean according to "General Cleaning" section. 2. Clean the gas tube opening with a damp cloth. 3. Clean clogged burner ports with a straight pin as shown. Do not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted, contact a trained repair specialist. A A B D C E D C A. Burner cap B. Burner base C. Alignment pins D. Igniter E. Gas tube opening Gas tube opening Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Keep spillovers out of the gas tube opening by always using a burner cap. 4. Replace the burner cap, making sure the alignment pins on the cap are properly aligned with the burner base. A B A. Incorrect B. Correct 5. Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, do not service the sealed burner yourself. Contact a trained repair specialist. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
7
Use the following chart as a guide when setting heat levels.
Sealed Surface Burners
IMPORTANT:
Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
Burner Cap Alignment
Always keep the burner cap properly fitted in place when using a
surface burner. A clean burner cap will help avoid poor ignition
and uneven flames. Always clean the burner cap after a spillover
and routinely remove and clean the caps according to the
“General Cleaning” section.
Standard Burner
Gas tube opening
Gas must flow freely throughout the gas tube opening for the
burner to light properly. Keep this area free of soil and do not
allow spills, food, cleaning agents or any other material to enter
the gas tube opening. Keep spillovers out of the gas tube
opening by always using a burner cap.
Burner ports
Check burner flames occasionally for proper size and shape as
shown below. A good flame is blue in color, not yellow. Keep this
area free of soil and do not allow spills, food, cleaning agents or
any other material to enter the burner ports.
Standard Burner
T
o Clean:
IMPORTANT:
Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Do not use oven cleaners, bleach
or rust removers.
1.
Remove the burner cap from the burner base and clean
according to “General Cleaning” section.
2.
Clean the gas tube opening with a damp cloth.
3.
Clean clogged burner ports with a straight pin as shown. Do
not enlarge or distort the port. Do not use a wooden
toothpick. If the burner needs to be adjusted, contact a
trained repair specialist.
4.
Replace the burner cap, making sure the alignment pins on
the cap are properly aligned with the burner base.
5.
Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, do not service the
sealed burner yourself. Contact a trained repair specialist.
SETTING
RECOMMENDED USE
Hi
■
Start food cooking.
■
Bring liquid to a boil.
Medium High
■
Hold a rapid boil.
■
Quickly brown or sear food.
Medium
■
Hold a slow boil.
■
Fry poultry or meat.
Medium Low
■
Stew or steam food.
■
Cook pudding, sauce, icing or
gravy.
Lo
■
Keep food warm.
■
Simmer.
A. Burner cap
B. Burner base
C. Alignment pins
D. Igniter
E. Gas tube opening
A
B
D
E
C
C
D
A
A. 1-1
¹⁄₂
" (25-38 mm)
B. Burner ports
A. Incorrect
B. Correct
B
A
A
B