KitchenAid KEBS207SSS Use & Care Guide - Page 6
Display, Start, Lower Oven Off, Upper Oven Off and Off, Clock, Tones, Fahrenheit and Celsius, - service manual
UPC - 883049034829
View all KitchenAid KEBS207SSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Display When power is first supplied to the oven, the clock will be flashing the message "clock-enter time." Time can be entered by touching either CLOCK SET/START or START to allow operation. To allow operation without setting a time, touch CLOCK SET/START, START or OFF. Oven Display When the oven(s) are in use, this display shows the oven temperature, heat source(s) and start time. On double oven models, this display will also show which oven is being set. The upper cavity symbol represents the upper oven; the lower cavity symbol represents the lower oven. In addition, during Timed Cooking, this display shows a time countdown and the stop time (if entered). If "Err" appears on the oven display, an error condition has occurred. Call for service, see the "Assistance or Service" section. Time of Day, Timer Display When the oven(s) are not in use this display shows the time of day or Timer countdown. Start The START key begins all oven functions except Sabbath Mode. If the Start key is not touched within 5 seconds after touching another key, "START?" will appear on the oven display as a reminder. If the Start key is not touched within 5 minutes after touching another key, the oven display will return to inactive mode and the programmed function will be canceled. Lower Oven Off, Upper Oven Off and Off The LOWER OVEN OFF, UPPER OVEN OFF and OFF keys stop their respective oven functions except for the Clock, Timer, and Control Lock. The oven cooling fan may continue to operate even after an oven function has been canceled or completed, depending on the oven temperature. Clock This is a 12-hour clock. Before setting, make sure the oven(s), Timer and Timed Cooking are off. To Set: 1. Touch CLOCK SET/START. 2. Touch the number keys to set the time of day. 3. Touch CLOCK SET/START again. Tones Tones are audible signals, indicating the following: One beep ■ Valid key touch ■ Oven is preheated ■ Function has been entered One chime ■ Preheat cycle has been completed Three beeps ■ Invalid key touch ■ End of a cooking cycle Three chimes ■ When timer reaches zero Includes using the Timer for functions other than cooking. Tone Volume The volume is preset at high, but can be changed to low. To Change: Touch OPTIONS and then "3" to toggle volume between high and low settings. All Tones All tones are preset on, but can be turned off. To Turn Off/On: Touch OPTIONS and then "2" to toggle tones between on/off settings. End-of-Cycle and Reminder Tones The Timed Cooking end-of-cycle and reminder tones are preset on, but can be turned off. If all tones have been turned off, the end-of-cycle and reminder tones cannot be independently turned on. To Turn Tones Off/On: Touch OPTIONS and then "4" to turn On. Touch OPTIONS and then "4" to turn Off. Fahrenheit and Celsius The temperature is preset in Fahrenheit, however it can be changed to Celsius. To Change: Touch OPTIONS and then "1" to toggle temperature between Fahrenheit and Celsius settings. When in Fahrenheit, "°F" follows the oven temperature. When in Celsius, "°C" follows the oven temperature. Options The OPTIONS selection key allows you access to 7 hidden functions within the Electronic Oven Control. These hidden functions allow you to change the oven temperature between Fahrenheit and Celsius, turn the audible signals and prompts on and off and adjust the oven calibration. The Sabbath Mode is also set using the OPTIONS selection key. To Use: Touch OPTIONS. The oven display will scroll through the various options, starting at 1 and ending automatically at 7. You can also touch the Options key repeatedly to manually scroll through the list of options. OPTIONS HIDDEN FUNCTION 1 Fahrenheit and Celsius conversion 2 Sound On/Off 3 Sound High/Low 4 End beep On/Off 5* Dehydrate 6 Oven temperature calibration 7** Sabbath Mode *On convection models **Sabbath Mode must be enabled 6