KitchenAid KEWS145SSS Installation Guide - Page 2
Installation Requirements
![]() |
UPC - 883049035154
View all KitchenAid KEWS145SSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed ■ Phillips screwdriver ■ Hand or electric drill ■ 1³⁄₈" (3.5 cm) hole saw Parts supplied ■ Two #8-18 x ⁵⁄₈" screws ■ Lens (for panel ready models) Check local codes. Check existing electrical supply. See "Electrical Requirements." It is recommended that all electrical connections be made by a licensed, qualified electrical installer. Location Requirements IMPORTANT: Observe all governing codes and ordinances. ■ Cutout dimensions that are shown must be used. Given dimensions provide minimum clearance with warming drawer. ■ Recessed installation area must provide complete enclosure around the recessed portion of the warming drawer. ■ Grounded electrical supply is required. See "Electrical Requirements" section. ■ Electrical supply outlet should be located in the rear wall on the upper right-hand side of the cutout or in an adjacent cabinet. The outlet must be recessed. If the electrical outlet is located in an adjacent cabinet, a 1³⁄₈" (3.5 cm) minimum diameter hole should have been drilled in the back of the cutout or support surface to pass the power supply cord through to the outlet. ■ Warming drawer support surface must be solid, level and flush with bottom of cabinet cutout. For best performance results make sure the warming drawer is leveled before completing installation. There is no way to level the warming drawer after it has been installed. If the installation is not level, the door may slide open or not seal tightly, allowing heat to escape. Product Dimensions B C A WARMING DRAWER SIZE 24" (61 cm) 27" (68.6 cm) 30" (76.2 cm) OVERALL WIDTH (A) 23³⁄₄" (60.3 cm) 26³⁄₄" (67.9 cm) 29³⁄₄" (75.6 cm) Cabinet Dimensions Cabinet Side View RECESSED WIDTH (B) RECESSED HEIGHT (C) 22¹⁄₄" (56.5 cm) 25¹⁄₄" (64.1 cm) 28¹⁄₄" (71.8 cm) 9" (22.9 cm) 9" (22.9 cm) 9" (22.9 cm) Warming drawer front 22³⁄₄" (57.8 cm) recessed oven depth 24" (61 cm) min. cutout depth Support surface must be solid, level, flush with bottom of cabinet cutout. 2
![](/manual_guide/products/kitchenaid-kews105sss-installation-guide-8870d75/2.png)