KitchenAid KFRS365TSS Installation Instructions - Page 33

Outdoor Grill Care

Get KitchenAid KFRS365TSS - Outdoor 36inch Gas GRI PDF manuals and user guides View all KitchenAid KFRS365TSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

OUTDOOR GRILL CARE Style 1 1. Unplug grill or disconnect power. 2. To remove glass light cover, remove screw and pull out light assembly. A Style 2 1. Unplug grill or disconnect power. 2. To remove glass light cover, remove screw and gently pry downward with a small flat-blade screwdriver at the left edge of the cover near the screw, and pull away from the retainer. A B A. Screw B. Light assembly 3. To remove the glass cover, gently pry apart the glass cover and the light housing using a flat-blade screwdriver between the glass cover and the clip. A A. Clip 4. Loosen the 2 screws in the bulb socket and pull out the bulb. A. Screw 3. Remove bulb from socket. 4. Replace bulb with a new 12-volt, 10-watt maximum, halogen bulb, using a tissue or wearing cotton gloves to handle the bulb. To avoid damaging the bulb, do not touch the bulb with bare fingers. 5. Replace glass light cover by placing end without clip into the clip mounted on the grill. Snap the screw end into place and tighten the screw. 6. Plug in grill or reconnect power. Replacing the Batteries (on some models) Follow these directions if the batteries need to be replaced. 1. Open the outer cover of the battery compartments, located in the grill cabinet near the right side panel. A A. Screws 5. Replace bulb with a new 12-volt, 25-watt maximum, halogen bulb, using a tissue or wearing cotton gloves to handle the bulb. To avoid damaging the bulb, do not touch the bulb with bare fingers. 6. Tighten the 2 screws in the bulb socket. 7. Replace glass light cover by placing the cover into the clips and snapping into the light housing. Replace and tighten the screw. 8. Plug in grill or reconnect power. B B A A. Outer battery compartment cover B. Inner battery compartment covers 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
33
OUTDOOR GRILL CARE
Style 1
1.
Unplug grill or disconnect power.
2.
To remove glass light cover, remove screw and pull out light
assembly.
3.
To remove the glass cover, gently pry apart the glass cover
and the light housing using a flat-blade screwdriver between
the glass cover and the clip.
4.
Loosen the 2 screws in the bulb socket and pull out the bulb.
5.
Replace bulb with a new 12-volt, 25-watt maximum, halogen
bulb, using a tissue or wearing cotton gloves to handle the
bulb. To avoid damaging the bulb, do not touch the bulb with
bare fingers.
6.
Tighten the 2 screws in the bulb socket.
7.
Replace glass light cover by placing the cover into the clips
and snapping into the light housing. Replace and tighten the
screw.
8.
Plug in grill or reconnect power.
Style 2
1.
Unplug grill or disconnect power.
2.
To remove glass light cover, remove screw and gently pry
downward with a small flat-blade screwdriver at the left edge
of the cover near the screw, and pull away from the retainer.
3.
Remove bulb from socket.
4.
Replace bulb with a new 12-volt, 10-watt maximum, halogen
bulb, using a tissue or wearing cotton gloves to handle the
bulb. To avoid damaging the bulb, do not touch the bulb with
bare fingers.
5.
Replace glass light cover by placing end without clip into the
clip mounted on the grill. Snap the screw end into place and
tighten the screw.
6.
Plug in grill or reconnect power.
Replacing the Batteries
(on some models)
Follow these directions if the batteries need to be replaced.
1.
Open the outer cover of the battery compartments, located in
the grill cabinet near the right side panel.
A. Screw
B. Light assembly
A. Clip
A. Screws
A
B
A
A
A. Screw
A. Outer battery compartment cover
B. Inner battery compartment covers
A
A
B
B