KitchenAid KGRA806PSS Installation Instructions - Page 12
KitchenAid KGRA806PSS - ARCHITECT Series: 30'' Gas Range Manual
View all KitchenAid KGRA806PSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4. Push CANCEL/OFF pad. 5. Reinstall oven bake burner access plate. Check Operation of Oven Broil Burner 1. Close the oven door. 2. Press the BROIL pad. Depending on your model, "HI" will appear in the temperature display OR "MAXI BROIL" and broil temperature will appear in the temperature display. 3. Press the START pad. On some models, "HEAT" and "ON" indicators will light. The oven burner should light within 8 seconds, under certain conditions it may take the burner up to 50 to 60 seconds to light. On some models, an electric halo element also turns on. Replace Oven Racks & Storage or Warming Drawer Replace oven racks in oven cavity. Insert storage drawer or warming drawer into slide rails on sides of drawer opening. Lift front of drawer slightly and push firmly to close drawer. Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all of your tools. 3. Dispose of/recycle all packaging materials. 4. Check that the range is level. See "Level Range." 5. Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by protective shipping material. Dry thoroughly with a soft cloth. For more information, see the "Range Care" section of the Use and Care Guide. 6. Read the Use and Care Guide. 7. Turn on surface burners and oven. See the Use and Care Guide for specific instruction on range operation. If range does not operate, check the following: