KitchenAid KHM620CS Use & Care Guide - Page 8
Setting Up Your Hand Mixer
View all KitchenAid KHM620CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting Up Your Hand Mixer C D B D Paired accessories (beaters, optional dough hooks) include one accessory with a collar (D), and one without (C). Single accessories come with a collar (D) (liquid blending rod) or without (C) (whisk). A B 2 Insert the accessory shaft with the collar (D) into the larger opening (B) of the hand mixer. Align the flanges on the shaft with the slots in the opening. Push to lock into place. NOTE: An accessory shaft without a collar may be used in either opening (A or B). Those with a collar may only be used in the larger opening (B). 3 Insert the accessory without a collar (C) into the smaller opening (A). Align and push to lock into place. Removing the accessories 1 If the Hand Mixer is running, stop the Hand Mixer by sliding the Power switch to "Off". Then unplug from the electrical outlet. 2 Press the ejector button to release the accessories from the Hand Mixer, then remove them. 8