KitchenAid KMBD104GSS Installation Instructions - Page 7
ASSISTANCE, Complete Installation
View all KitchenAid KMBD104GSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
9. Install four 1" (2.5 cm) screws to secure the Microwave Drawer in place, then close the drawer. Complete Installation 1. Check the operation of Microwave Drawer by placing 1 cup (250 mL) of water in the Microwave Drawer and programming cook time of 1 minute at 100% power. 2. If the Microwave Drawer does not operate: ■■ Check that a household fuse has blown, or a circuit breaker tripped. Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician. ■■ Check that the power supply cord is plugged into a grounded 3 prong outlet. ■■ See the Use and Care Guide for troubleshooting information. Installation is now complete. Save these Installation Instructions for future use. ASSISTANCE Call your authorized dealer or service center. When you call, you will need the microwave drawer model number and serial number, both of which can be found on the model and serial number plate. If you need additional assistance, call us at our toll-free number or visit our website listed in the Use and Care Guide. To access the model and serial number plate, fully open the microwave drawer. The plate is located on a flat surface just beyond the back wall of the drawer. 7