KitchenAid KODE900HSS Owners Manual - Page 17
Oven Care, Self-Cleaning Cycle
View all KitchenAid KODE900HSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
OVEN CARE WARNING Self-Cleaning Cycle How the Cycle Works IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring, loss of gloss, hairline cracks, and popping sounds. The Self-Cleaning Cycle uses very high temperatures, burning soil to a powdery ash. Use the following chart as a guide to determine the desired cleaning level. Burn Hazard Do not touch the oven during the Self-Cleaning cycle. Keep children away from oven during Self-Cleaning cycle. Failure to follow these instructions can result in burns. Cleaning Level Light Normal Heavy Total Cleaning Time (includes a 30-minute cool-down time) 4 hours 5 hours 6 hours IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room. Self-clean the oven before it becomes heavily soiled. Heavy soil results in longer cleaning and more smoke. Keep the kitchen well-ventilated during the Self‑Cleaning cycle to help get rid of heat, odors, and smoke. Do not block the oven vent(s) during the Self-Cleaning cycle. Air must be able to move freely. See the "Oven Vents" section. Do not clean, rub, damage or move the oven door gasket. The door gasket is essential for a good seal. Prepare Oven: ■■ Remove the +Powered Attachments, broiler pan, grid, cookware and bakeware and, on some models, the temperature probe from the oven. ■■ Remove oven racks to keep them shiny and easy to slide. See the "General Cleaning" section for more information. ■■ Remove any foil from the oven because it may burn or melt, damaging the oven. ■■ Hand clean inside door edge and the 11/2" (3.8 cm) area around the inside oven cavity frame, being certain not to move or bend the gasket. This area does not get hot enough during high temp self-cleaning to remove soil. Do not let water, cleaner, etc., enter slots on door frame. Use a damp cloth to clean this area. ■■ Wipe out any loose soil to reduce smoke and avoid damage. At high temperatures, foods react with porcelain. Staining, etching, pitting, or faint white spots can result. This is normal and will not affect cooking performance. Once the oven has completely cooled, remove ash with a damp cloth. To avoid breaking the glass, do not apply a cool damp cloth to the inner door glass before it has completely cooled. The oven lights will not work during the Self-Cleaning cycle. On double-oven models, only one oven can self-clean at a time. If one oven is self-cleaning, the other oven cannot be set or turned on. NOTE: The oven has a 2-speed cooling fan motor. During self‑clean, the fan(s) will operate at its highest speed to increase airflow to better exhaust the hotter air through the oven vent(s). An increase in noise may be noticeable during and after the self-clean cycle until the oven cools. To Start Self-Cleaning Before self-cleaning, make sure the door is closed completely or it will not lock and the cycle will not begin. 1. Touch SELF CLEAN. Select the oven to self-clean. 2. Touch SOIL LEVEL. Select the length of time to self-clean. 3. Touch START. The oven will start locking the door. Opening the door at this point will cancel the self-clean cycle. The start time and stop time will appear in the oven display. The stop time includes an additional cool-down period after the Self-Cleaning cycle is complete. The door will not unlock until the oven is cool. 4. Touch CANCEL for the selected oven or open and close the oven door to clear the oven display and/or stop reminder tones. To Stop Self-Cleaning anytime: Touch CANCEL for the selected oven. If the oven temperature is too high, the door will remain locked. It will not unlock until the oven cools. 17