KitchenAid KP2671XAC Instruction and Recipe Booklet - Page 16
Attachments and Accessories, General Instructions
UPC - 050946866635
View all KitchenAid KP2671XAC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Attachments and Accessories General Information KitchenAid® Attachments are designed to assure long life. The attachment power shaft and hub socket are of a square design, to eliminate any possibility of slipping during the transmission of power to the attachment. The hub and shaft housing are tapered to assure a snug fit, even after prolonged use and wear. KitchenAid® Attachments require no extra power unit to operate them; the power unit is built-in. Attachment Knob Attachment Power Shaft‡ Hinged Hub Cover ® Attachment Housing Attachment Hub Socket ‡Not part of mixer. Notch Pin Attachment Shaft Housing General Instructions To Attach 1. Turn stand mixer off and unplug. 2. Loosen attachment knob by turning it counterclockwise. 3. Flip up hinged hub cover. 4. Insert attachment shaft housing into attachment hub, making certain that attachment power shaft fits into square attachment hub socket. It may be necessary to rotate attachment back and forth. When attachment is in proper position, the pin on the attachment will fit into the notch on the hub rim. 5. Tighten attachment knob by turning clockwise until attachment is completely secured to stand mixer. 6. Plug into a grounded 3 prong outlet. To Remove 1. Turn stand mixer off and unplug. 2. Loosen attachment knob by turning it counterclockwise. Rotate attachment slightly back and forth while pulling out. 3. Replace attachment hub cover. Tighten attachment knob by turning it clockwise. 16