KitchenAid KRFC302ESS Owners Manual - Page 13
Install Produce Preserver (on some models), Installing the Produce Preserver
View all KitchenAid KRFC302ESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
On models with notches: � With the indicator screen facing outward, slide the indicator down into the notches. NOTE: The indicator will not easily slide into the notches if the rear bubble has not been popped. � Close the air filter door, and check that the indicator is visible through the window in the door. A. Status indicator window B. Air filter status indicator C. Notches � Place the indicator in a visible place you will easily remember -either inside the refrigerator or elsewhere in your kitchen or home. Replacing the Air Filter The disposable air filter should be replaced every 6 months, when the status indicator has completely changed from white to red. To order a replacement air filter, see ordering information in the Quick Start Guide. 1. Remove the used air filter by squeezing in on the side tabs. 2. Remove the used status indicator. 3. Install the new air filter and status indicator using the instructions in the previous sections. Install Produce Preserver (on some models) Your refrigerator's accessory packet includes a Produce Preserver, which should be installed prior to use. On some models, the Produce Preserver is already installed at the factory. To order a replacement produce preserver, use part number W10346771. The Produce Preserver absorbs ethylene, allowing the ripening process of many produce items to slow down. As a result, certain produce items will stay fresh longer. Ethylene production and sensitivity varies depending on the type of fruit or vegetable. To preserve freshness, it is best to separate produce with sensitivity to ethylene from fruits that produce moderate to high amounts of ethylene. Sensitivity to Ethylene Ethylene Production Apples High Very High Asparagus Medium Very Low Berries Low Low Broccoli High Very Low Cantaloupe Medium High Carrots Low Very Low Citrus Fruit Medium Very Low Grapes Lettuce Pears Spinach Low High High High Very Low Very Low Very High Very Low Installing the Produce Preserver CAUTION: IRRITANT. MAY IRRITATE EYES AND SKIN. DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS. Do not mix with cleaning products containing ammonia, bleach, or acids. Do not get in eyes, on skin or clothing. Do not breathe dust. Keep out of reach of children. FIRST AID TREATMENT: Contains potassium permanganate. If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse with water. Style 1-Located Inside the Refrigerator: 1. Find the Produce Preserver housing inside the refrigerator. 2. Lift up on the housing to remove it from the mounting tab. 3. Open the housing by pulling up and out on the back of the top of the housing. 4. Remove the Produce Preserver pouches from the packaging. Place them into the housing then snap housing back together. NOTE: For best performance, always use two pouches. 5. Adhere the Produce Preserver housing to the back wall of the crisper drawer according to the instructions included in the package. 6. Place housing back on mounting tab. Style 2-Located in Crisper or Refrigerator Drawers: For your convenience, the suction-mounted produce preserver can be installed in either the crisper or the refrigerated drawers. 1. Wash the interior of a drawer with a solution of mild dish soap and warm water and dry thoroughly. 2. Find the package containing the Produce Preserver inside the refrigerator and install the Produce Preserver into the drawer, according to the instructions provided in the package. 13