KitchenAid KRFF507HPS Dispensing Guide - Page 1
KitchenAid KRFF507HPS Manual
View all KitchenAid KRFF507HPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
French Door Bottom Mount Dispensing and Storage Guide Water and Ice Dispenser Controls A. Ice maker B. Air filter C. Water filter D. Door bins E. Crispers F. Pantry drawer G. Freezer drawer H. LED ramp-on lighting I. In-Door-Ice® ice dispensing system J. Slide-Out Shelf/Pull-Out Tray / Platter Pocket (depending on model) 2. Press and hold the Options and Lock buttons at the same time for 3 seconds. The words "Back" and "1 Cup" will appear on the display screen. Also, the Calibrate Measured Fill icon will illuminate and remain lit while the Measured Fill feature is being calibrated. NOTE: You may press Ice Mode "Back" at any time to exit calibration mode. The Calibrate Measured Fill icon will turn off. A. Water dispenser paddle TO DISPENSE WATER (STANDARD) IMPORTANT: Dispense at least 1 qt (1 L) of water every week to maintain a fresh supply. 3. Press and release the water dispenser paddle, as needed, to dispense water to the 1 cup fill line. 1. Press a sturdy glass against the water dispenser paddle. NOTE: If overfilling or spilling occurs, discard the water and press Ice Mode "Back" to restart the calibration process. 2. Remove the glass to stop dispensing. 4. When 1 cup of water has been correctly dispensed into the TO DISPENSE WATER (MEASURED FILL) measuring cup, touch Measured Fill button under the word Measured Fill allows you to dispense a specified amount of water "Confirm" to confirm the calibration. with the touch of a few buttons. When Measured Fill calibration has been confirmed, the NOTE: The amount of water you select will be dispensed. Be sure Calibration icon will disappear and the display will return to the that the container is empty and can hold the entire volume. If ice is home screen. in the container, you may need to adjust your selection. 1. Press Measured Fill to turn the feature on. When the feature is Household water pressure may affect the accuracy of the Measured on, the Measured Fill screen appears on the display. Press Ice Fill feature. For optimum performance of your water dispenser, you Mode under "Back" to manually turn off the Measured Fill must first calibrate Measured Fill. feature. How to calibrate Measured Fill: IMPORTANT: Flush the water system before calibrating Measured Fill. 1. Place a sturdy measuring cup (1-cup [237 mL] size) on the dispenser tray centered in front of the water dispenser paddle. NOTE: Depending on your model, a measuring cup may be provided. 1