KitchenAid KUDC20FVSS Installation Instructions - Page 24
Complete Installation
UPC - 883049157573
View all KitchenAid KUDC20FVSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
6 Check side attachment plastic button Check that grounding clip is attached to the lower panel. Position the lower panel behind the access panel. On some models there is insulation on the access panel which must fall behind the insulation on the lower panel. 2 Reinstall access panels If securing with a side attachment, check that sides of door do not rub against the screw heads. If they do, dishwasher must be re-centered. When dishwasher is properly centered, replace plastic buttons. 7 Remove towel and replace lower dishwasher rack Hold the two panels together and place them against dishwasher leg. Using a Philips or 1/4" screwdriver, reinstall the screws through the holes in the access panel and the slots in the lower panel. 3 Check lower panel edge Remove towel from dishwasher. Reinstall the lower dishrack. If needed, see website for animated representation of this step. Visit www.kitchenaid.com/anchoring under FAQ tab. Complete Installation 1 Reinstall access panels Insulation (on some models) Access panel Lower panel 24 Insulation Grounding clip Check that the lower edge of the lower panel contacts the floor. Adjust if necessary. 4 Tighten screws Tighten access panel screws.