KitchenAid KUDD03DTPA Installation Guide - Page 18
Install Panel Fasteners, Mount the Custom Panel
UPC - 883049128054
View all KitchenAid KUDD03DTPA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Install Panel Fasteners 1. Remove the 2 panel fasteners from the face of the inner door of the drawer. Custom Decorative Panel or Custom Wood Panel 1. Mount the custom panel to the drawer by aligning the panel fasteners to the 2 keyhole slots and insert the panel. Custom Decorative Panel 2. Screw the 2 panel fasteners into the panel fastener pilot holes of the custom panel. Mount the Custom Panel Custom Decorative Panel Only 1. Remove the tape from the green ground wire on the custom decorative panel. The end of the green ground wire is factoryattached to the custom decorative panel. 2. Attach the ring connector end of the green ground wire on the custom decorative panel to the ring connector and ground screw on the dishwasher drawer intermediate panel. Custom Wood Panel A B A. Green ground wire B. Ground screw 2. To secure the custom panel onto the drawer, push the custom panel down until the top of the custom panel is flush with the top of the control panel. 3. Using the screws provided, secure the custom panel to the inner door by screwing through the inner door and into the ¹⁄₈" (3.2 mm) pilot holes. 18