KitchenAid KUDD03DTPA Installation Guide - Page 5

Location Requirements IMPORTANT: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or electrical shock. Proper installation is your responsibility. ■ Contact a qualified installer to ensure that the dishwasher is installed to meet all electrical and plumbing national and local codes and ordinances. ■ Install the dishwasher as specified in these instructions. ■ Have everything you need to properly install dishwasher. ■ Avoid damage from freezing to dishwasher and water lines leading to dishwasher. Damage from freezing is not covered by the warranty. ■ This dishwasher is manufactured for indoor use only. ■ Install and level dishwasher on a floor that will hold the weight, and in an area suitable for its size and use. Product Dimensions Installation Clearances Cutout Dimensions 24" (61 cm) 24" (61 cm) 23³⁄₈" (59.5 cm) Preferred Utility Area 24" 33⁷⁄₈" (61 cm) (86 cm) 33³⁄₄" (85.7 cm) A ¹⁄₂" (1.3 cm) 25" (63.5 cm) B 8" (20.3 cm) 19¹⁄₄" (48.9 cm) 1¹⁄₂" (3.75 cm) A. Left-hand or right-hand water connection route B. Left-hand or right-hand electric connection and drain route NOTE: All holes should be drilled at 1½" (3.8 cm) diameter. Water Supply Requirements ■ A hot water line with 20 to 120 psi (138 to 862 kPa) water pressure. ■ 120°F (49°C) water temperature at dishwasher. ■ Flexible stainless steel braided fill line (½" minimum plastic tubing is not recommended). 5