KitchenAid KUDH03DTBL Installation Instructions - Page 13
Install Trim Pieces and Level Dishwasher
UPC - 883049140728
View all KitchenAid KUDH03DTBL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
5. Reinstall electric box cover with all wires contained inside the terminal box. 5. Check left to right level by placing the level on the top of the drawer. Check front to back level by placing level on the slide rails. Install Trim Pieces and Level Dishwasher 1. Open bottom drawer. 2. Push in clips and slide rails back 5" (12.7 cm). 6. Adjust legs with a socket wrench to level the dishwasher. A 3. Lift drawer off slide rails. Place drawer off to the left on covering. Slide rails into dishwasher. 11 A. Adjust legs. 7. Rest trim strip on floor and mark trim at the top of the frame flange height. Pick the closest groove to the mark. If the mark is between two grooves, choose the groove that makes the trim strip the shortest. On a covered surface, cut the trim strip at the selected groove. Pull dishwasher back out of cabinet opening about 6" (15.24 cm). 2 2 2 4. Slide the dishwasher into position in the cabinet opening. Check to ensure that the drain hose and electrical wiring are not kinked. 1 3 1 13